Meter Event List
List of Meter Events for Consideration
This list is not final. It is a working list for review and discussion
Working notes from 2025/6/3 meeting:
Need to define a semantic data model for events
Need to determine which events are mandatory
How does the GEISA environment what are the parameters that drove the event condition, when event thresholds are configurable? Does the GEISA app need to know at all? Could this be provided out-of-band? e.g. the utility configures the meter event threshold and also configures that same threshold on the app if necessary.
Are events streamed or simply available for retrieval? If we choose to support both, need to determine which events are streamed.
Events are “something happened.” “Normal” is not an event; however “Return to Normal” may be.
Generally, if a GEISA app needs something specific, it should be able to derive that from the raw data coming from the meter.
Should we have the ability for apps to request the event list? General agreement that we want this. Should we have filtering? By date range. Yes. By event type? No.
Event subscription and requesting historical events are two different calls / APIs.
Type | Event | Name | Event log | History log | Displayable | Tamper |
|---|---|---|---|---|---|---|
Standard | SE-001 | Primary power down | • |
|
|
|
Standard | SE-002 | Primary power up | • |
|
|
|
Standard | SE-003 | Time changed (old time) | • |
|
|
|
Standard | SE-004 | Time changed (new time) | • |
|
|
|
Standard | SE-009 | Procedure invoked |
| • |
|
|
Standard | SE-010 | Table written to |
| • |
|
|
Standard | SE-014 | Reset list pointers | • |
|
|
|
Standard | SE-016 | History log cleared |
| • |
|
|
Standard | SE-018 | Event log cleared | • |
|
|
|
Standard | SE-020 | Demand reset occurred | • |
|
|
|
Standard | SE-021 | Self read occurred | • |
|
|
|
Standard | SE-022 | Daylight Saving Time on | • |
|
|
|
Standard | SE-023 | Daylight Saving Time off | • |
|
|
|
Standard | SE-024 | Season change | • |
|
|
|
Standard | SE-026 | Special schedule activated | • |
|
|
|
Standard | SE-027 | Tier switch change | • |
|
|
|
Standard | SE-032 | Test mode started | • |
|
|
|
Standard | SE-033 | Test mode stopped | • |
|
|
|
Standard | SE-037 | Configuration error detected | • |
| • |
|
Standard | SE-041 | Nonvolatile memory failure detected | • |
| • |
|
Standard | SE-042 | Clock error detected | • |
| • |
|
Standard | SE-043 | Measurement error detected | • |
| • |
|
Standard | SE-045 | Low loss potential detected | • |
| • |
|
Standard | SE-047 | Tamper attempt detected | • |
| • |
|
Standard | SE-048 | Reverse rotation detected | • |
| • |
|
Manufacturer | ME-008 | Phase A voltage not active | • |
| • |
|
Manufacturer | ME-009 | Phase A voltage active | • |
|
|
|
Manufacturer | ME-010 | Phase B voltage not active | • |
| • |
|
Manufacturer | ME-011 | Phase B voltage active | • |
|
|
|
Manufacturer | ME-012 | Phase C voltage not active | • |
| • |
|
Manufacturer | ME-013 | Phase C voltage active | • |
|
|
|
Manufacturer | ME-014 | Remote flash failed | • |
|
|
|
Manufacturer | ME-015 | Metrology firmware changed | • |
|
|
|
Manufacturer | ME-021 | Seed changed | • |
|
|
|
Manufacturer | ME-023 | Optical port lockout | • |
|
|
|
Manufacturer | ME-030 | Service disconnect opened | • |
| • |
|
Manufacturer | ME-031 | Service disconnect closed | • |
| • |
|
Manufacturer | ME-034 | Service disconnect load side voltage present | • |
| • |
|
Manufacturer | ME-035 | Service disconnect load side voltage not present | • |
|
|
|
Manufacturer | ME-036 | Meter configuration changed | • |
|
|
|
Manufacturer | ME-037 | Configuration error detected (with data) | • |
| • |
|
Manufacturer | ME-038 | Unauthorized requests | • |
|
|
|
Manufacturer | ME-039 | Authentication service failure | • |
| • | • |
Manufacturer | ME-040 | Voltage monitoring phase A minimum voltage | • |
|
|
|
Manufacturer | ME-042 | Voltage monitoring phase C minimum voltage | • |
|
|
|
Manufacturer | ME-043 | Voltage monitoring phase A maximum voltage | • |
|
|
|
Manufacturer | ME-045 | Voltage monitoring phase C maximum voltage | • |
|
|
|
Manufacturer | ME-046 | Voltage monitoring phase A normal voltage | • |
|
|
|
Manufacturer | ME-048 | Voltage monitoring phase C normal voltage | • |