Module description
The Fugitive data are status points that are transmitted by the PA only on 0=>1 control.
The fugitives data are acquired from the PA like normal status point. The fugitives data are acquired from the PA like normal status point. When a fugitive status point is received (value 1), it is normally transmitted to the north service. A new datapoint is then generated by the module with a value of 0 and is transmitted in the same way to the centers with a modified timestamp (+1ms).
However, on CG they must systematically be sent to 0.
Configuration
The module needs the list of status point of the site configured as fugitive.
Fomat
The status points are declared in the "Exchanged data". A property "datapoints.pivot_subtypes" allows to define the nature of a status points. If it is declared as "transient", the plugin must perform the processing associated with this type.
The "datapoints.pivot_id" property corresponds to the identifier of the status point.
The plugin is configured with "Exchanged data".
Pivot model interaction
Input
The module uses the identification (Attribute "PIVOTTS.GTIS.Identifier") of the data to determine if it is a fugitive status point to process.
Output
For each value 0=>1 received from the AP, the module transmits the value to the center. If the status point is fugitive, a new datapoint is copied with :
- its value is 0
- its timestamp is incremented (+1ms).
The new data generated in the format takes the form :
- For a simple data type :
- PIVOTTS.GTIS.SpsTyp.stVal = False
- PIVOTTS.GTIS.SpsTyp.t.SecondSinceEpoch (incremented timestamp)
- PIVOTTS.GTIS.SpsTyp.q.Source = "substituted"
- PIVOTTS.GTIS.TmOrg.stVal = "substituted"
- For a double data type :
- PIVOTTS.GTIS.DpsTyp.stVal = off
- PIVOTTS.GTIS.DpsTyp.t.SecondSinceEpoch (incremented timestamp)
- PIVOTTS.GTIS.DpsTyp.q.Source = substituted
- PIVOTTS.GTIS.TmOrg.stVal = substituted