Content Comparison

...

• Bump SEAPATH Yocto distribution version

  • If not already done, bump python3-setup-ovs, python3-vm-manager and python3-svtrace in recipes-seapath:

    • SRCREV

    • Version in recipe file name for python3-setup-ovs and python3-vm-manager

• Change the version in SEAPATH distro files for SEAPATH Yocto

• Add vX.Y.Z.xml file in repo-manifest (pointing to vX.Y.Z repositories using commit ID)

• Use this vX.Y.Z.xml file as default manifest

• tag these repositories with vX.Y.Z:

  • ansible

  • build_debian_iso

  • yocto_bsp

  • meta-seapath

  • ansible-role-systemd-networkd

  • vm_manager

  • cockpit-*cluster-vm-management

  • cockpit-cluster-dashboard

  • cockpit-update

  • python3-setup-ovs

  • repo-manifest

  • snmp_passpersist

  • cukinia-tests

• Revert the repo-manifest

• Publish ansible code on ansible-galaxy with version v1vX.0Y.0Z

• Write a wiki page with all the release note

• Write one dedicated release note for the following repositories :

  • ansible

  • build_debian_iso

  • yocto_bsp

...

•  Flasher *
•  cqfd -b flasher
•  Hypervisor cluster
•  Release image * → cqfd -b host_efi_swu
•  Debug image → cqfd -b host_efi_dbg_swu
•  Minimal image → cqfd -b host_efi_minimal
•  Hypervisor standalone *
•  cqfd run ./build.sh -v -i seapath-host-efi-swu-image --distro seapath-standalone-hostRelease image → cqfd -b host_standalone_efi_swu
•  Debug image → cqfd -b host_standalone_efi_dbg
•  Guest
•  Release image * → cqfd -b guest_efi
•  Debug image → cqfd -b guest_efi_dbg
•  Observer *
•  cqfd -b observer_efi_swu

• Create a SEAPATH flasher USB key.

• Clone the revision that will be release of SEAPATH Ansible

• Set up the Ansible inventory for

  • Standalone machine

  • Cluster

    • 2 hypervisors

    • 1 observer

    • 1 VM

• Flash and validate a standalone hypervisor

  • Flash a machine with the built standalone release image using the flasher.

  • Boot the newly flashed machine, check that it is reachable from SSH.

  • Ansible configuration → Use the revision that will be release of SEAPATH Ansible

    • Set up the Ansible inventory for the standalone test machine

  • Configure the standalone hypervisor: cqfd run ansible-playbook --limit standalone_machine -i <inventory-to-use> playbooks/seapath_setup_main.yaml

  • Check that no cukinia test failcukinia tests succeed : sudo cukinia

• Deploy and validate SEAPATH guest VM on a standalone machine

  • Using the SEAPATH guest VM previously built, deploy it in the cluster

    • cqfd run ansible-playbook playbooks/deploy_vms_standalone.yaml -i <path-to-inventory>

  • Open a console in the VM (vm-mgr console or via SSH)

  • Check that cukinia tests succeed: sudo cukinia

• Flash and validate a cluster hypvervisors and observer

  Deploy a VM in a cluster

  • Flash a SEAPATH cluster: 2 hypervisors and 1 observer

  • Boot the newly flashed machine, check that it is reachable from SSH

  • Run Ansible setup on the SEAPATH cluster

    • Set up the Ansible inventory for the cluster

    • Configure the cluster cqfd run ansible-playbook --limit cluster_machines playbooks/seapath_setup_main.yaml

• Run Cukinia tests

  • Run Cukinia’s test on a standalone hypervisor

  • Run Cukinia’s test on a hypervisor inside a cluster

  • Run Cukinia’s test on an observer

  • Run Cukinia’s test on a VM

• Deploy a standalone VM

• • Check that cukinia tests succeed on hypervisors and observer : sudo cukinia

• Deploy and validate SEAPATH guest VM in a cluster

  • Using the SEAPATH guest VM previously built, deploy it in the cluster

    • cqfd run ansible-playbook playbooks/deploy_vms_cluster.yaml -i <path-to-inventory>

  • Open a console in the VM (vm-mgr console or via SSH)

  • Check that cukinia tests succeed: sudo cukinia

  • Test VM migration

    • sudo crm ressource move <vm-name> <destination-node>

Debian

TODO