Content Comparison

...

• Create a SEAPATH flasher USB key.

• Flash and validate a standalone hypervisor

  • Flash a machine with the built standalone release image using the flasher.

  • Boot the newly flashed machine, check that it is reachable from SSH.

  • Ansible configuration → Use the revision that will be release of SEAPATH Ansible

    • Set up the Ansible inventory for the standalone test machine

  • Configure the standalone hypervisor: cqfd run ansible-playbook --limit standalone_machine -i <inventory-to-use> playbooks/seapath_setup_main.yaml

  • Check that no cukinia test failsucceed : sudo cukinia

• Flash and validate a cluster

  • Flash a SEAPATH cluster: 2 hypervisors and 1 observer

  • Run Ansible setup on the SEAPATH cluster

    • Set up the Ansible inventory for the cluster

    • Configure the cluster cqfd run ansible-playbook --limit cluster_machines playbooks/seapath_setup_main.yaml

  Run Cukinia tests

  • Run Cukinia’s test on a standalone hypervisor

  • Run Cukinia’s test on a hypervisor inside a cluster

  • Run Cukinia’s test on an observerCheck that cukinia test succeed on hypervisors and observer : sudo cukinia

• Run Cukinia tests

  • Run Cukinia’s test on a VM

• Deploy a standalone VM

• Deploy a VM in a cluster

...