Module description

...

Configuration

ACCESS status point

The configuration of a status point cyclic is present in the Exchanged_data configuration.

An attribute called "ts_syst_cycle" is added to allow the configuration of a status point as cyclic (in seconds).

Example :

 {
	"label" :"GAMBS_0_TS-SYST_ACCES",
	"pivot_id" :"xxx",
	"pivot_type" :"SpsTyp",
	"pivot_subtypes" : ["acces"],
	"ts_syst_cycle" :30
	"protocols" :[
	   {
		  "name" :"hnzip",
		  "typeid":"yyy",
		  "address":"zzz"
	   }
	]
 }

CONNEXION LOSS status point

The configuration of the status point in Exchanged_data includes the subtype of the status point. To configure a status point as PRT.INFO, the pivot_subtypes attribute is set to prt.inf.

 {
	"label" :"GAMBS_0_TS-SYST_ACCES",
	"pivot_id" :"xxx",
	"pivot_type" :"SpsTyp",
	"pivot_subtypes" : ["prt.inf"],
	"protocols" :[
	   {
		  "name" :"hnzip",
		  "typeid":"yyy",
		  "address":"zzz"
	   }
	]
 }

...

Filtering rules

ACCESS status point

The readings are transmitted without any check or modification.

CONNEXION LOSS status point

The readings are transmitted without any check or modification.

Data processing

ACCESS status point

Input

The cycling of the status point is not conditioned by the reception of data by the module.

Ouput

For each status point configured to be sent cyclically, the generated data is as follows:

...

CONNEXION LOSS status point

Input

The plugin listens to the status reading of the associated South service.

If the "connx_status" is in the "not connected" state, the plugin must generate a status point configured with the value 0.

If the "gi_status" is in the "finished" state, the plugin must generate a status piont configured with the value 1.

Output

The plugin generates the status point in its output as follows:

...

• A Notification Rule plugin (fledgepower-rule-systemsp) responsible of scanning the Readings flowing through Fledge and generate a Notification when a relevant event occured.
• A Notification Delivery plugin (fledgepower-notify-systemsp) responsible of:
  • Receiving the Notifications from the other plugin, create new Readings based on the data they contain in if necessary, and send those through Fledge.
  • Run cyclic task that will send a Reading through Fledge at regular intervals.

...